AGFA CL34 Digital Camera User Manual


 
Chapter 1: Getting to Know Your Camera 13
Power Sources
Your ePhoto CL34 has two possible power sources:
!
batteries
!
USB power
Batteries
Inserting batteries
Your ePhoto CL34 camera comes with 4 AA Alkaline batteries.
"
Note: You can also use AA NiMH or AA Lithium batteries.
1
Open the door of the battery compartment.
2
Insert 4 AA appropriate batteries. Make sure the pole-marks on the batteries (+ and -)
correspond to those in the battery compartment.
3
Slide the battery compartment door back into place.
Battery status
The Display always indicates the status of the battery. Segments disappear as power is used.
Full Half-full Nearly Empty
"
Note: The Nearly Empty-icon indicates that the inserted batteries will power your camera for
only a few minutes more.
Battery care
!
If you are not going to use your camera for an extended period of time, remove the batteries to
prevent leaks or corrosion.
!
Before replacing the batteries, switch OFF the camera.
!
Use only size AA Alkaline, NiMH (with a minimum capacity of 1200 mAh) or Lithium batteries.
!
Do not use batteries that show signs of leakage, corrosion or swelling.
!
Do not use batteries that are excessively warm.
!
If necessary, clean battery contacts with a dry cloth before installation.
!
Always replace all batteries with four identical, new (or fully charged) ones.
!
Dispose used batteries in a manner that complies with applicable laws.