Filter
Top Products
1. Installation Precautions
1-5
Safety Notes
Chapter 1
Operating Environment
The environmental requirements for operating the system are as follows:
Temperature: 10 °C to 35 °C (50 °F to 95 °F) with a fluctuation of 10 °C (18°F) per hour.
Humidity: 15% to 85% with a fluctuation of 20% per hour.
Using the Printer
To ensure the optimum performance of the printer, follow the precautions listed below:
!
NEVER open any Cover, or turn OFF the printer during printing.
!
NEVER bring any magnetized object or flammable gas or liquid close to the printer.
!
ALWAYS insert the Power Plug all the way into the outlet.
!
ALWAYS provide good ventilation when making a large number of continuous prints.
NOTE
= Locate the Printer in a Well Ventilated Room =
A minimal amount of ozone is generated during normal operation of the printer. An
unpleasant odor may, however, be created in poorly ventilated rooms during extensive
printer operations.
For a comfortable, healthy, and safe operating environment, it is recommended that the
room be will ventilated.
Care of Printer Supplies
Use the following precautions when handling the printer supplies (Imaging Cartridge, paper,
etc.).
!
Avoid storing the supplies in any of the following places:
• A place subject to direct sunlight. The Imaging Cartridge should not be exposed to flu-
orescent light, either.
• A hot place or near an open flame.
• A humid place.
• A dusty place.
!
Store paper, which has been removed from its wrapper but not loaded onto the print tray,
in a sealed plastic bag in a cool, dark place.
!
Only use Imaging Cartridges that are exclusively designed for use with this printer.
!
Keep supplies out of the reach of children.
!
If your hands become soiled with toner, wash them with soap and water immediately.
NOTE
Whenever the Imaging Cartridge is removed from the printer, immediately wrap it in a
heavy cloth to protect it from light.
0820771003.book Page 5 Monday, March 19, 2001 2:49 PM