AGFA SR 24 Digital Camera User Manual


 
4-5
Miscellaneous
Chapter 4
2. Initial Settings List
This system offers two types of settings: one is the user settings that are made by the user on
the control panel and the other is the system settings that are made by the authorized
dealer. Here is a list of factory settings for these two setting types.
* When any of these functions has been changed and you want to store that new setting in
the system’s memory, press the Memory Input Key.
User Settings Initial Setting Remark
Exposure mode Auto
Print image density Center
Print Format Portrait
Film type Auto
Auto Skew Correction OFF
Auto Masking OFF
Manual Masking - Enabled only when the Manual Frame Masking Kit
(option) is mounted.
Centering/Fit OFF
System Settings Description Selection Initial Setting
Auto reset Setting changes made to the control panel
that are not used within 60 seconds of
being input are automatically cancelled
and the system reverts back to the origi-
nal settings.
Enabled
Disabled
Auto power save
(PR mode only)
Turns the Printer’s fuser OFF if the sys-
tem is left idle for a specific period of
time.
* 200V units operate on a default 30
minute Auto Power Save setting.
Disabled
30 min.
60 min.
Auto Projection
Lamp OFF
Turns the Scanner’s Projection Lamp
OFF if the system is left idle for a speci-
fied period of time.
Disabled
30 min.
60 min.
Fine mode con-
trast select
Applies the following functions as
required:
Contrast Emphasis: applied when film
contains text that is poorly contrasted
against its background making it difficult
to read.
Outline Emphasis: applied when film
contains blurred black and white images.
Contrast
Emphasis
Outline
Emphasis
0820771003.book Page 5 Monday, March 19, 2001 2:49 PM