Filter
Top Products
1-6
Safety Notes Chapter 1
2. Turning the Power On and Off
Turning ON
Press the Power Switch of the
scanner to the
I
(ON) position.
Press the Power Switch of the printer
to the
I
(ON) position.
The Control Panel displays a blinking
“1” and the machine starts to warm
up. The machine is ready to read data
when the “1” stops blinking.
Useful Tips
If you load the film in the film carrier and
press the start button while the printer is
warming up, you can scan and memorize
the film image of about 9 pages (Letter or
A4 size/400dpi) into this system.
And then, printer allows that print process
to be started as soon as the printer
completes warming up.
At this time, both ends of Exposure
Display blink.
If you want to disable this function, ask
your authorized Technical Representative
to make change the system setting.
1
2
A3/A4 Laser Printer
A4 Laser Printer
3
Darker
Auto
Lighter
0820771003.book Page 6 Monday, March 19, 2001 2:49 PM