Filter
Top Products
4-8
Miscellaneous Chapter 4
3. System Care
The system should be cleaned on a daily basis for optimal operating conditions.
Cleaning the Scanner
With a damp cloth, clean and remove
any dust or debris from the surface of
the Screen.
NOTE
NEVER use alcohol or any other solvent
when cleaning to avoid causing damage
to the Screen or erasing the frame size
markers.
Dust the exterior panels of the
Scanner with a soft, dry cloth.
With a damp cloth, clean and remove
any dust or debris from the surface of
the Carrier Glass.
NOTENOTE
Before cleaning the Carrier Glass, be sure
to remove the Projection Lens from the
Scanner.
To open the Carrier Glass, pull the
handle of the Microfiche Holder.
Following the same procedure
described in Step 1, wipe the inner
surfaces of the Carrier Glass.
Dry and polish the glasses with a soft,
dry cloth to prevent spotting or
smearing.
Screen
1
Outer Covers
1
Carrier Glass (Option)
1
2
3
0820771003.book Page 8 Monday, March 19, 2001 2:49 PM