Filter
Top Products
Email
The computer must meet the following system requirements to use the PC Application. For a complete list of
precautions, notes on usage, and notices, please see the JKW-IP Operation Manual. Please refer to the JK-1MD or the
JK-1MED instructions for other specification requirements, such as cabling method and conductor requirements.
OS Software v 1.0.0 32-bit Microsoft Windows XP (SP3), 32-bit Windows Vista (SP1)
Software v 1.2.0 32-bit and 64-bit Windows XP (SP3), Vista (SP1), and Windows 7
PC system
Requirements Processor: 2 GHz or faster
System memory (RAM): 1 GB RAM or more
Hard disk: 10 MB or more (additional space is needed for recording)
Sound card: 8-bit full duplex, Direct Sound compatible
Display: 1024 x 768 or greater
Run-time: Microsoft(R).NET Framework 2.0 or later
Network: 10BASE-T/100BASE-TX Ethernet
Protocol TCP/IPv4, UDP/IPv4, SIP, SMTP, Others
Network bandwidth 320 k to 8 Mbps (per IP Video Intercom Adaptor)
Language English, French, Spanish, German, Dutch, Italian, Japanese
Browser Internet Explorer 6.0 or later (with Internet Options SSL 3.0 enabled)
Note: Windows is the registered trademark of Microsoft Corporation in the United Sates and other countries.
Power 18VDC, Shares power with the JK master monitor
Current consumption Standby 110 mA, Maximum 200 mA
Communication Hands-free / Priority transmission
Image Format JPEG
Image Resolution 320×240 (QVGA)
Network Interface 10BASE-T/100BASE-TX Ethernet
Network Protocol TCP/IP, UDP/IP, SIP
Email Authentication SSL, CRAM-MD5 hash, or CLEAR (unencrypted).
Network Bandwidth 320 K to 8 Mbps (per IP Video Intercom Adaptor)
Operating Temperature 0°C to 40°C (+32°F to +104°F)
Dimensions 200 (H)×150 (W)×35.5 (D) mm
7-7/8 (H) x 5-15/16(W) x 1-7/16 (inches)
Weight Main Unit: Approx. 370 g (0.82 lbs)
Color White
Note: The PC Application is protected by intellectual property rights owned by International Systems Research Co.
Pg. 2
1 GENERAL OVERVIEW AND WIRING
®
®
2 SOFTWARE SYSTEM REQUIREMENTS
3 SPECIFICATIONS
LAN / WAN
JK-1MED / JK-1MD
PS-1820UL
+
-
+
-
1A1
1A2
B1
B2
L
L
A1
A2
B1
B2
+
-
JK Door
LAN
JKW-IP
PT
Option output
Sensor IN 4
Sensor IN 3
Sensor IN 2
Sensor IN 1
x10
The following steps will be outlined in this
QuikStart guide for setting up your PC and
each JKW-IP adaptor. Please ensure that
you follow these steps in order.
Step 1: Configure your PC‟s IP address
(pg. 3)
Step 2: Configure the JKW-IP
adaptor(s) IP address (pg. 4)
Step 3: Install the JKW-IP software
(pg. 5)
Step 4: Register each adaptor (pg. 5)
Optional: Optional features (pgs. 6-8)
®
®