Filter
Top Products
-
16
-
3.3 Viewing Images
Method A > Access Camera from SkyIPCam Utility
Step 1A Open Airlink101 SkyIPCam Utility, select the camera you wish to connect to and click on Link
button. Go to Step 3.
Method B > Access Camera from Web Browser
Step 1B If you assigned a static IP address for your camera (at Step 6, Chapter 3.2), you may open the
Web Browser on your computer.
Step 2B Type the IP address of your camera in the Address bar, and press Enter.
Step 3 Enter administrator’s username and password of the camera, then click OK. The default
username and password are both “admin” if you did not make any change to it at Step 5, Chapter 3.2.