Filter
Top Products
139
Problem
The zoom play
cannot be per-
formed.
The image is too
dark or bright.
Even when the
lens comes out,
the data panel is
turned off and
the camera can
not function.
The recorded
image file is
damaged.
The camera
does not function
correctly due to
the strong static
electricity, etc.
Check
Did you take a picture with the digi-
tal zoom function?
Is the exposure compensation
value specified?
Has the battery-condition
indicator blinked (all the indicators
disappeared after 5 seconds ) ?
Did you remove the CF card when
the image data was recorded in or
read out from the CF card?
Solution
The picture captured with the digital zoom
function cannot be played back in the zoom
play mode.
Specify 0 for the exposure compensation
value.
If the battery-condition indicator blinks, all
the indicators will disappear after 5 seconds
while the lens is protruding.
The data is being recorded in or read out from
the CF card while the focus lamp ( green )
blinks slowly (about 2 times in a second ). Do
not remove the CF card from the camera.
Page
50
80
55
25
32
-
Remove the batteries and insert them again. When using the AC adapter ( sold
separately ) , disconnect the plug of the AC adapter from the AC outlet and then
connect it again.
After that, turn on the power of the camera.
* If the power of the camera cannot be turned off correctly, the CF card may be
damaged. In this case, transfer the image data in the CF card to the computer and
then format the CF card.
TROUBLESHOOTING- CONT'D