Filter
Top Products
42
WEP security mode: Select an encryption mode from the list. The format is “None”
by default, indicating that the security function is disabled.
Authentication mode: One of the following authentication modes is required when
you select a WEP encryption mode from the security list.
1. 64 Bit (10 Hex chars)
2. 64 Bit (5 ASCII chars)
3. 128 Bit (26 Hex chars)
4. 128 Bit (26 ASCII chars)
WEP key password encryption mode:
You can set up 64 Bit or 128 Bit WEP key password encryption mode. A set of 64 Bit
encryptions is equivalent to 10 sets of hexadecimal digits or 5 sets of ASCII
characters. A set of 128 Bit encryptions is equivalent to 26 sets of hexadecimal digits
or 13 sets of ASCII characters.
Encoding HEX ASCII
Available characters 0~9, a~f, A~F 0~9, a~f, A~Z
64 Bit 10 5
128 Bit 26 13
Basic Setting > Network > Wireless > Wireless IP Assignment (IP setting in
the wireless networking mode)
DHCP setting:
DHCP (Dynamic Host Configuration Protocol) is a protocol that enables automatic
assignment of TCP/IP information to the client. Each DHCP client connects to the
DHCP server to access its network setting information, including IP address, gateway,
and DNS server.
Encryption mode
Encryption authentication type
Encryption group