Asante Technologies Voyager II Security Camera User Manual


 
44
image transmission. However, video fragment or mosaics may occur due to poor
transmission quality.
Basic Setting > Network > PPPoE (dial-up networking setting)
PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a
high-speed wideband network using a PC and a wideband modem (such as xDSL,
Cable, Wireless modem). The user need only to equip the PC with an Ethernet card
and apply to ISP (such as HiNet) and ADSL provider (such as Chunghwa Telecom)
for ADSL service to roam the Internet through ordinary twisted copper wires.
PPPoE: Point to Point Protocol over Ethernet is applicable to networking via a xDSL
or cable modem. PPPoE setting must be executed in the LAN environment for your
PC to connect to ADSL. Follow the steps below to complete the setting:
1. Dial: You can select whether or not to dial when you boot the machine.
2. Use DHCP or fixed IP for connection to the LAN environment.
Streaming port setting