Filter
Top Products
14
OPERATING THE HOMEBASE
Preliminary Connections
Prior to initial operation, the unit must be plugged in, and the tab (“REMOVE THIS TAB”) on the right side of
the unit must be removed to enable backup battery operation.
Connecting the power
Power to the homebase is provided by the AC-to-DC wall adapter, which delivers +9VDC to the DC input con-
nector at the rear of the unit. Refer to the installation procedures outlined previously for the methods involved
in connecting the wall adapter plug to the power input connector, and the routing and dressing of the adapter
power cable. The figure below illustrates a typical installation.
Inserting the Memory Card/USB Device
All memory devices attach at the left side of the homebase. These can include USB Flash Memory, a Compact
Flash (CF) Memory Card, a Multi-Media Card (MMC), a Memory Stick (MS) Card, a Secure Digital (SD) Card or
an xD Card. All of these devices are inserted into their respective receptacles with the label side facing the
rear of the homebase.
DPF711K
HB-711-OM-128-8270-Eng.qxp 6/5/08 9:37 AM Page 14