Filter
Top Products
15
GETTING STARTED
Once homebase is properly mounted and plugged in, you are ready
to begin. If you want to use your own pictures, be sure to have your
memory card already connected.
1. Turn homebase on by moving the power switch on the left
side upward. After just a few seconds, you will see a white
welcome screen that says “audiovox homebase.”
IF YOUR MEMORY CARD IS CONNECTED… a slide show
with your pictures will automatically start.
NO MEMORY CARD IS CONNECTED…a slide show with
sample pictures will automatically start.
NOTE: If this is not the first time homebase is used, the white
welcome screen may stay on with no pictures displayed. This
is OK, as the sample pictures may have been deleted. You
may want to erase the sample pictures prior to adding your
pictures to the memory. You will learn about how to erase
pictures in detail later on.
2. Press the OK/menu button. Everything homebase does
starts here. You will see the main “menu” (“exit”,
“memo”, “calendar”, “timer”, “photo” and “settings”).
“Calendar” will automatically be highlighted in orange.
3. Try pressing the up and down arrows and watch the
orange highlighter move. This is how you will highlight
your function choices. Pressing OK/menu will take you
straight to any of these options. It’s that simple!
4. Remember, highlighting and selecting “exit” and/or
“back” will always take you back home, even if you must
do so several times. Home is the homebase screen or pic-
ture slide show.
Now, let’s learn more about using homebase’s many features. Please note that all instructions are provided
starting from “home”
DPF711K
exit
memo
timer
calendar
photo
setting
memo
HB-711-OM-128-8270-Eng.qxp 6/5/08 9:37 AM Page 15