Filter
Top Products
AXIS M3113-R Network Camera
Events
Events
The Axis product can be configured to perform actions whe n di ffe rent events occur, for exa mple , start a recording when motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed applications to trigger the rule, see Applications, on page 26 .
• Detectors
- Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 23.
- Tampering — trigger the rule when tamp ering is detected, see Camera Tampering, on page 23.
• Hardware
- Network — trigger the rule if network connection is lost or restored.
• Input Signal
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on
the Live View page, on page 8 . This can for example be used to validate actions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from the preset position.
• Storage
- Available — trigger the rule when the storage device is unmounted or rem oved. This can for example be
used to send maintenance no tifications.
- Full — trigger the rule when the
storage device is full. Under normal operation, the oldest recordings will b e
overwritten to prevent the storage device from becom ing full.
- Locked —triggertheruleifthestoragedeviceislocked(writeprotected).
• System
- System Initializing — trigger the rule whe n the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see Recurrences, on page 29. This can for example be used to upload
an image every 5 minutes.
- Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 29.
Available actions
include:
• PTZ Control
- Preset Position — go to a preset position.
- Guard Tour — start a g uard tour, see Guard Tour, on page 21.
27