AXIS P5532 PTZ Dome Network Camera
Detectors
Detectors
Motion Detection
Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude
windows can be configured:
• Include windows — target specific areas within the whole video image
• Exclude windows —define areas within an Include window that should be ignored (areas outside Include w indows
are automatically ignored)
Once configured, motion detection windows appear in the list of Detectors in Action r u le setup. See Setting Up an Action Rule, on
page 32.
Note
Using the motion detection feature may decrease the product’s overall p erf ormance.
Set up motion detection
To set up a motion de tection Includ e Window, follow these instructions :
1. Go to Detectors > Motion Detection.
2. Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter
adescriptivename.
3. Adjust the size (drag the b ottom r ight-hand corner) and the position (click on the text at the top and drag to the desired
position) o f the active window (window with red frame).
4. Adjust the Object Size, History and Sensitivity profile sliders (see Motion detection pa rameters f or details). Any dete c ted
motion within an active window is indicated by red peaks in the Activity window.
5. Click Save.
To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the
include window.
To delete an include or exclude window, select the window in the list of windows and click Del.
Motion detection parameters
The parameters controlling motion detectio n are described in the table below:
28