AXIS P5532 PTZ Dome Network Camera
Hardware overview
• ConnectingtoAXISInternetDynamicDNSService.Seepage 40. To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See page 46.
Restart button - Press to restart the product.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from A xis) is required in order to maintain the product’s IP
rating, see Multi-Connector Cable (sold separately), on page 47.
LED indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for fi rmware upgrade failure.
Green Shows steady green for 10 seconds for no rmal operation after restart.
Note
• The Status LED can be configured to flas h while an event is active.
Midspan LED indicators
LED
Color
Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, fl
ashing
Slow flas
h when over current or short circuit condition o n the por t.
Port
Green, flashing
Fast flash when input voltage is out of range or other internal error.
AC input Green Steady when AC power connected.
6