Filter
Top Products
16 en | Camera Mounting EX14 Marine Camera
F.01U.240.878 | 1.0 | 2011.07 Instruction Manual Bosch Security Systems, Inc.
4.1 Mounting instructions
The camera is intended to be securely mounted to a wall using
the mounting bracket supplied with the enclosure. The camera
has been evaluated for wall mounting using 2 in. long #10 wood
screws with washers secured into a 2 x 4 stud under 1/2 in. of
drywall.
1. Locate a stud in the wall and mark outside edges of stud.
2. Using the wall mount bracket as a template, align the
mounting holes with the center of the stud.
3. Mark points on the wall in the center of the holes where
the mounting screws are positioned.
4. Remove the wall mount bracket and using a 1/8 in. drill bit.
Drill pilot holes at the marked points.
5. Align the holes in the bracket with the holes drilled in the
wall.
6. Using a screwdriver secure the wall mount bracket by
screwing the #10 screws and washers securely into the
stud.
7. Mounting is complete.
(Camera has not been evaluated for safety requirements
using other mounting kits.)