Filter
Top Products
EX14 Marine Camera Camera Connections | en 19
Bosch Security Systems, Inc. Instruction Manual F.01U.240.878 | 1.0 | 2011.07
5.2 LED Array Adjustments
The LED Array sensitivity has been set at the factory before
shipment. For photocell sensitivity adjustment refer to the
following illustration:
NOTE: Use a Neutral Density filter or Infrared Pass filter to
cover the lens during focusing to simulate low light conditions
on scene for correct 24 hour focusing. The camera should be
focused with the lens iris fully opened to simulate the worst
possible depth of field. Using a Neutral Density filter of Infrared
Pass filter will ensure the iris is fully open for correct setup and
adjustment.
1 Power to LED Array
2 Photocell Adjustment
– CW - Increase sensitivity
– CCW - Decrease sensitivity
3 12 V Enable
4Power Input