Filter
Top Products
4 en | Safety MegaPixel IP Cameras
F.01U.064.422 | V 1.0 | 2007.03 User Manual Bosch Security Systems
10. Power sources - Operate the unit only from the type of power source
indicated on the label. Before proceeding, be sure to disconnect the
power from the cable to be installed into the unit.
– For external power supplied units, use only the recom-
mended or approved power supplies.
– For limited power source units, this power source must
comply with EN60950. Substitutions may damage the unit
or cause fire or shock.
– For 9-12 VDC units, voltage applied to the unit's power
input should not exceed 12.3 VDC. User-supplied wiring
must comply with local electrical codes (Class 2 power lev-
els). Do not ground the supply at the terminals or at the
unit's power supply terminals.
– If unsure of the type of power supply to use, contact your
dealer or local power company.
11. Servicing - Do not attempt to service this unit yourself. Opening or
removing covers may expose you to dangerous voltage or other haz-
ards. Refer all servicing to qualified service personnel.
12. Damage requiring service - Unplug the unit from the main AC power
source and refer servicing to qualified service personnel when any dam-
age to the equipment has occurred, such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather
(rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly fol-
lows the operating instructions.
13. Replacement parts - Be sure the service technician uses replacement
parts specified by the manufacturer, or that have the same characteris-
tics as the original parts. Unauthorized substitutions may cause fire,
electrical shock, or other hazards.
14. Safety check - Safety checks should be performed upon completion of
service or repairs to the unit to ensure proper operating condition.
15. Installation - Install in accordance with the manufacturer's instructions
and in accordance with applicable local codes.
16. Attachments, changes or modifications - Only use attachments/acces-
sories specified by the manufacturer. Any change or modification of the
equipment, not expressly approved by Bosch, could void the warrantee