Filter
Top Products
FlexiDome2X Configuration | en 29
Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03
5 Configuration
The camera normally provides an optimal picture without the
need for further adjustments. There are six pre-defined modes
with settings to make configuration easier. Advanced set-up
options are available in a menu system for getting the best
results under special circumstances.
The camera implements your changes immediately so that
before and after settings are easily compared.
5.1 Menu access
Use the five navigation buttons on the camera for selecting and
navigating through the various menus. There are two upper
level menus: a Main menu and an Install menu. The menus have
functions that can be selected directly or submenus for more
detailed set-up. Use the up/down, right/left buttons for
navigation.
5.1.1 Main menu
To access the Main menu, press the menu/select button
(center) for less than 1 second. The Main menu appears on the
monitor. The Main menu allows you to select and set-up the
picture enhancement functions. If you are not happy with your
changes, you can always recall the default values for the mode.
5.1.2 Install menu
The camera also has an Install menu in which the installation
settings can be set. To access the Install menu, press the
menu/select button (center) for longer than 1 second.
Up button
Menu/Select button (center)
Right button
Down button
Left button