Filter
Top Products
30 en | Configuration FlexiDome2X
AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems
5.2 Pre-defined modes
There are six pre-defined modes with settings to make
configuration easier. You can select one of the six pre-defined
modes in the Install/Mode submenu. The modes are defined as
follows:
1. 24-hour
Default installation mode to provide stable pictures over a
24-hour period. These settings are optimized for out-of-
the-box installation.
2. Traffic
Capture high-speed objects using default shutter in
variable lighting conditions.
3. Low light
Provide extra enhancement, such as AGC and SensUp to
make usable pictures in low-light conditions.
4. Smart BLC
Settings optimized to capture details in high contrast and
extremely bright-dark conditions.
5. Low noise
Enhancements are set to reduce picture noise. Useful for
conditional refresh DVR and IP storage systems because
reducing noise reduces the amount of storage required.
6. Analog systems
Use this mode if the camera is connected to a purely
analog system (e.g. matrix switcher with VCR) or to a CRT
monitor. Useful mode for evaluating/demonstrating the
camera when it is directly connected to a CRT monitor.