Filter
Top Products
3
1 Connection
Connect the DC plug of the AC-DC power adapter to the DC IN (9V)
socket at the back of the photo frame. Connect the power adaptor
to a AC 230/240V mains socket.
Caution:
Only connect the mains adapter to a properly installed wall socket
with a voltage matching to the"Technical data" of the mains adapter.
Using an incorrect adaptor could damage your photo frame or adaptor.
The remote's battery is factory installed, Open the battery compartment
door and remove the protective battery sheet before use. When the
battery becomes weak, replace the battery with a type CR2025 3V
Lithium battery. When installing the new battery make sure to install
the battery with the "+" side up.
MS: dimensions for the MS Card are 50mm x 21.5mm x 2.8mm, which is the exclusive memory card format
for Sony's digital products, as shown in the illustration:
USB: supports 1.1 and 2.0
CF:
SD/MMC: with dimensions of 24mm x 32mm x 2.1mm (about the size of a postage stamp) as shown in
the illustration:
2 Supported Interfaces
Note: This unit has been designed where possible to be compatible with most makes of USB device and
memory cards. Due to the many varied types available, we cannot guarantee that all makes and models
are able to be used.