Filter
Top Products
29
c) If you only want to delete the current one, just skip this step. If
all images and videos in the SD card should be deleted, push the
RIGHT or LEFT key and then the LCD will show [Del Image All].
d) Pressing the OK key will inform you again whether to perform
the operation with “No” (default prompt). Press the RIGHT or LEFT
key to change the value to “Yes” and then [Yes] highlighted will
display in the middle of LCD.
e) Press the OK key to delete and MENU key to exit to step a).
Please Note, after deleting a picture or a video le, the deleted les can’t
be restored! Furthermore, in order to delete all images and video clips in
the SD card, it is possible to format the SD card, refer to 4.1.2.
4.3 LIVE Monitoring
In the SETUP mode you should set the necessary operational parameters
of the BUSHNELL TROPHY CAM, such as camera mode and triggering
interval time. Next, switch to the ON mode. And then the device starts
monitoring automatically.
By entering into the ON mode, the motion indication LED (red) will blink
for about 10s. This time lets you make preparation for monitoring. For
example, you can mount and lock the front cover, x the BUSHNELL
TROPHY CAM and then walk away. In this waiting time, the PIR indication
light (RED) will blink continuously. After the light is put o, the PIR starts
to work.
When activity occurs in front of the camera, the PIR can detect them and
then the BUSHNELL TROPHY CAM starts to take picture(s) or video as
programmed. According to the pre-dened triggering interval time the
PIR can be reactivated after this time lapse is over. Next, the BUSHNELL
TROPHY CAM will repeat this process. Please note, the PIR is strongly
sensitive to the temperature. When the temperature dierence between
environment and object goes larger, the sensing distance is farther. The
average sensing distance is about 45 ft.
4.2.3 Deleting Operations (Stand-alone) (continued)