Filter
Top Products
109
Customization
[MARKER LEVEL] Markers’ Intensity Level
Changes the intensity of the markers displayed on the screen to 40% (gray) or 100% (white).
Setting Options: [MARKER] Level/center/grid markers: [100%], [40%]
[ASPECT] Aspect ratio guides: [100%], [40%]
[SAFETY] Safety zone guides: [100%], [40%]
[F.AST BW-MOD] Focus Assist Function B&W Display Mode
Changes the display mode to black & white while the focus assist functions are activated.
Setting Options: [MAGN.] While the Magnifying function is active: [OFF], [ON]
[PEAKING] While the Peaking function is active: [OFF], [ON]
[OBJ DST UNIT] Object Distance Units Display
Selects the units meters or feet for the display of the distance to the object.
Setting Options: [m (meter)], [ft (feet)]
[ZOOM INDICATOR] Zoom Indicator Display
Selects the display of the zoom indicator between a graphic bar and a numeric display.
Setting Options: [BAR], [NUMBER]
[COLOR BARS] Color Bars Signal
Selects the type of signal to use to produce the color bars: SMPTE color bars (type 1) or ARIB color bars
(type 2).
Setting Options: [TYPE 1], [TYPE 2]
[1kHz TONE] 1 kHz Reference Audio Signal
Selects the strength of the audio signal.
Setting Options: [OFF], [-12dB], [-18db], [-20dB]
[WIRELESS REMOTE] Wireless Remote Controller
Selects the remote sensor mode that the camcorder will accept. When set to [OFF ] the camcorder will
not accept commands from wireless controllers.
Setting Options: [1], [ 2], [OFF ]
[LANC AE SHIFT] AE SHIFT Dial on a Controller
Selects the function of the AE SHIFT dial on the optional ZR-2000 Zoom Remote Controller so you can use it
to adjust the exposure compensation or the aperture value.
Setting Options: [AE SHIFT], [IRIS]
[TALLY LAMP] Tally Lamp
Selects the operation of the tally lamp. Even if set to [OFF], the tally lamp will turn on when receiving a
command from the wireless controller.
Setting Options: [ON], [BLINK], [OFF]
[LED] LED Indicators
Selects the operation of the LED indicators on the camcorder. When set to [TYPE 1], all LED indicators
(including that of the HDV/DV terminal) will be on. When set to [TYPE 2] all LED indicators will be on, except
for that of the HDV/DV terminal.
Setting Options: [TYPE 1], [TYPE 2], [OFF]
[CUSTOM REC] Custom Recording
Selects whether to embed the on-screen character displays (date and time) as part of the video recording
and whether to record on the tape the enlarged image when using the Magnifying focus assist function.
• When [CHARACTER REC] is set to [ON], the menu option [TV SCREEN] will not be available and
[COMP.OUT] will automatically be set to [1080i/480i] and you will not be able to select [480i].
Setting Options: [CHARACTER REC] Recording of superimposed on-screen displays: [OFF], [ON]
[MAGNIFYING REC] Recording of enlarged image while the Magnifying function is active:
[OFF], [ON]
10
11
12
13
14
15
16
17
18
19
20