Canon 1000 HS Digital Camera User Manual


 
72
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
The focusing range is approximately 5 cm (20 in.) – infinity at maximum wide
angle (j), and approximately 1 m (3.3 ft.) – infinity at maximum telephoto
(i).
Enter G mode.
Follow Steps 1 – 2 on p. 61 to choose G.
Adjust the settings according to
your purposes (pp. 73 – 81).
Shoot.
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Enter Exposure Compensation mode.
After pressing the m button, press the
op buttons or turn the  dial to choose
#, then press the m button again.
Adjust the brightness.
While watching the screen, press the op
buttons or turn the  dial to adjust the
brightness, then press the m button.
XThe exposure compensation amount will
appear on the screen.
Shooting in Program AE
What if the shutter speed and aperture value appear in orange?
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value are shown in orange. Try the
following settings to obtain the correct exposure.
Turn on the flash (p. 73)
Choose a higher ISO speed (p. 76)
Adjusting the Brightness (Exposure Compensation)
COPY