Filter
Top Products
Appendix: Menu Options Lists
144
1
Option available only for recording movies.
2
Can be set independently for and mode. The default value in mode is [E PF24].
3
Option available only for recording photos.
[Rate Scenes (Recording)]: When set to [A On], the scene rating scene will appear after every scene
you record.
[Scan Reverse Rec]: Inverts the recorded image horizontally, vertically or horizontally and vertically.
[Memory Info]: Displays a screen where you can verify how much of the built-in memory or the memory
card is currently in use (l total recording time and k total number of photos) and how much space
remains available for recording.
• Estimated figures about available movie recording time and available number of photos are
approximate and based on the recording mode and photo quality/size settings currently in use.
• In the information screen of a memory card you can also check its Speed Class.
• The [Total space] shown for the built-in memory indicates actually usable space. It may be slightly
smaller than the nominal built-in memory capacity listed in the specifications.
[x.v.Color]: Uses a color space with an extended gamut to achieve deeper colors, closer to real life.
• Use this function to record video only when you intend to play back your recordings on an HDTV
compatible with x.v.Color, connected to the camcorder using the supplied HDMI cable. If recordings
made with x.v.Color are played back on a non-compatible TV, colors may not be reproduced
correctly.
[Photo Capture
from Video]
3
[A Single Photo], [B Photo Sequence] – – z – 97
[Scan Reverse
Rec]
1
[B Off], [ Vertical], [ Horizontal], [ Both] z z – – –
[Memory Info] [f] (built-in memory), [4] (memory card X),
[7] (memory card Y)
z z z z –
[x.v.Color] [A On F], [B Off] z z – – –
[Color Bars &
Test Tone]
1
[B Off], [ Color Bars], [ Color Bars & Tone] z z – – 77
[Photo
Numbering]
3
[a Reset], [b Continuous] z – z z –
Menu item Setting options y
CINEMA
1 2 0
COPY