Filter
Top Products
48
<A> is a fully automatic mode. The camera analyzes the scene and
sets the optimum settings automatically.
With Scene Intelligent Auto, the camera always focuses automatically. You
can select one of three AF methods with the menu or Quick Control screen.
When you select [u (face)+Tracking], the person’s face will be detected and
focused (p.66). [FlexiZone - Multi] makes it easier to focus a moving subject
(p.68). [FlexiZone - Single] uses only one AF point to focus the desired
target subject (p.69).
Using [u (face)+Tracking] is explained below.
1
Set the Mode Dial to <A>.
2
Check the AF point.
When a face is detected, the <p> AF
point will appear over the face to be
focused.
You can also tap the screen to select the
face or subject. If the subject is not a
face, < > will be displayed.
If no faces are detected or if you tap the
screen but do not select any face or
subject, the camera will switch to
[FlexiZone - Multi] for automatic
selection (p.68).
A
Fully Automatic Shooting (Scene Intelligent Auto)
AF point
COPY