Filter
Top Products
76
Connecting the camera to a TV set is recommended to play back the movies
shot (9?).
* For details on manual-exposure movie shooting (M), see the Camera Instruction
Manual PDF file.
When you select the Movie shooting mode [k], autoexposure is set to adjust
the brightness automatically.
1
Set the Mode Dial to <k>.
2
Select [k] (Movie auto exposure)
for the shooting mode.
3
Focus the subject.
Before shooting a movie, focus with AF
or manual focus (p.65-69).
By default, [Movie Servo AF: Enable]
(9?) is set for continuous
focusing.
When [Movie Servo AF] is set to
[Enable], you can tap [ ] on the
screen’s lower left to stop/start the
focusing. If you stop the focusing, the AF
point will turn gray.
4
Shoot the movie.
Press the <o> (Movie start/stop) button
to start shooting a movie. To stop
shooting the movie, press the <o>
(Movie start/stop) button again.
X While the movie is being shot, the “o”
mark will be displayed on the upper right
of the screen.
While shooting a movie, be careful not to
cover the microphone with your finger.
k Shooting Movies
Autoexposure Shooting
Recording movie
Microphone
COPY