Canon 8063B002 Digital Camera User Manual


 
106
1
2
3
4
5
6
7
8
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
•Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
of movies on the memory card corresponds to the actual recording time (=
82,
119).
[ ] is displayed and shooting stops automatically.
Thecamera’sinternalmemorybufferlledupasthecameracouldnotrecordtothe
memory card quickly enough. Try one of the following measures.
•Use the camera to perform low-level formatting of the memory card (=
83).
•Lower the image quality (=
43).
•Switch to a memory card that supports high-speed recording (=
119).
Zooming is not possible.
•Zooming is not possible when shooting movies in [ ] mode (=
49).
Playback
Playback is not possible.
•Imageormovieplaybackmaynotbepossibleifacomputerisusedtorenamelesor
alter the folder structure. Refer to the Software Guide (=
21) for details on folder
structureandlenames.
Playback stops, or audio skips.
•Switch to a memory card that you have performed low-level formatting on with the
camera (=
83).
•There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
•When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
•Adjust the volume (=
68) if you have activated [Mute] (=
81) or the sound in
the movie is faint.
•No sound is played for movies shot in [
] mode (=
49) because audio is not
recorded in this mode.
Memory Card
The memory card is not recognized.
•Restart the camera, with the memory card in it (=
28).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
•Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <
m
> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images (=
101).