Filter
Top Products
Connecting to an External Monitor
146
Options
NOTES
• For [Letterbox], because the camera uses a simple conversion process vertically, diagonal lines may appear
jagged.
• For MON. terminal output during 4K mode, because the camera uses a simple conversion process, color
shifting may be visible.
• If you set an assignable button to [Resize MON. Output] (A 111), you can press the button to switch the
resizing method.
Applying a LUT to Canon Log Gamma
When checking video recorded with Canon Log gamma on an external
monitor connected to a MON. terminal, you can apply a LUT.
1 Open the [Select] submenu (under [LUT]).
[ 4K/2K/MXF Setup] > [MON. 1 & 2] > [Select]
2 Select the desired option and then press SET.
3 Press the LUT button.
• The selected LUT will be applied.
Options
[Letterbox]: The picture is reduced in size while maintaining the aspect ratio and black letterbox bars are added to
the top and bottom of the image so that the picture has a 16:9 aspect ratio.
[Squeeze]: The image is squeezed from the left and right so that the entire image fits within the screen. The image
will appear normal if the external monitor also has a 1.896:1 aspect ratio.
[Side Crop]: The left and right sides of the image are cropped so that the central part of the image fits within the
screen.
Original 4K or 2K image
(1.896:1)
[Letterbox] setting [Squeeze] setting [Side Crop] setting
[Rec. 709]: Converts to a color space based on the ITU-R BT.709 standard.
[Wide DR]: Converts to a wide dynamic range.
[ 4K/2K/MXF Setup]
[MON. 1 & 2]
[Select]
[Rec. 709]
COPY