Filter
Top Products
65
Video Configuration: Type of Recording, Resolution and Frame Rate
Selecting the Resizing Method When Converting to HD Video
When converting 4K or 2K image data with a resolution of 4096x2160, 4096x1080 or 2048x1080 to MXF video
with a resolution of 1920x1080, you can select how it will be recorded on a CF card or output from the HD/SD
SDI terminal, HDMI OUT terminal and SYNC OUT terminal (only when [HD-Y] is selected).
1 Open the [Resize MXF Output] submenu.
[ 4K/2K/MXF Setup] > [Resize MXF Output]
2 Select [Letterbox], [Squeeze] or [Side Crop] and then press SET.
• The options are the same as those listed for
Selecting the Resizing
Method
(A 145).
NOTES
• If you set an assignable button to [Resize MXF Output] (A 111), you can press the button to switch the
resizing method.
• During 4K and 2K modes, the picture output from the 3G-SDI terminals and the picture recorded on a CF card
will differ in image quality due to differences in the signal processing algorithm.
• Because the camera uses a simple resize conversion process vertically, diagonal lines may appear jagged.
Selecting the Video Configuration for MXF Mode
To set the video configuration, select the system frequency, system priority, bit rate and resolution, and frame
rate, as necessary. For a summary of the video configuration, refer to the table following the procedures below.
Selecting the System Priority
1 Open the [System Priority] submenu.
[ 4K/2K/MXF Setup] > [System Priority]
2 Select [MXF] and then press SET.
• The camera will restart in MXF mode.
2K
12-bit
10-bit
2048×1080
1920×1080
59.94P
50 Mbps / 1920x1080
35 Mbps / 1920x1080
25 Mbps / 1440x1080
29.97P
29.97P
23.98P 23.98P
50.00P
25.00P
25.00P
24.00P 50 Mbps / 1920x1080 24.00P
10-bit
2048×1080
1920×1080
59.94P
50 Mbps / 1280x720
35 Mbps / 1280x720
59.94P
50.00P 50.00P
Operating modes:
Video configuration for external recording Video configuration recorded on CF card
System priority Recording mode Resolution Frame rate Bit rate / Resolution Frame rate
[ 4K/2K/MXF Setup]
[Resize MXF Output]
[Letterbox]
[ 4K/2K/MXF Setup]
[System Priority]
[4K]
COPY