Filter
Top Products
201
Specifications
• 2 Iris: 1/2-stop increments, 1/3-stop increments, fine-tuning
• ISO Speed
1-stop increments: ISO 320, ISO 400 to ISO 12800, ISO 20000
1/3-stop increments: ISO 320 to ISO 20000
•Gain: -6 dB to 30 dB (3-dB increments), 0 dB to 24 dB (fine-tuning in 0.5-dB increments)
• Shutter Speed
Speed (1/3-stop increments, 1/4-stop increments), angle, clear scan, slow, off
• 2 Lens Peripheral Illumination Correction: Available for Canon EF lenses
4
4
Some Canon EF lenses are not compatible with peripheral illumination correction.
• Sensor Sensitivity (MXF mode, ISO 640 (0 dB), 2000 lux, 89.9% reflection)
59.94 Hz mode: F9 (1920x1080 at 59.94i) 50.00 Hz mode: F10 (1920x1080 at 50.00i)
• S/N Ratio (MXF mode, ISO 850, using Canon Log gamma)
54 dB (typical, 1920x1080, 59.94 Hz mode at 29.97P / 50.00 Hz mode at 25.00P)
• Subject Illumination (MXF mode, 24 dB, with a f/1.2 lens)
59.94 Hz mode: 0.30 lux (29.97P, shutter speed 1/30)
50.00 Hz mode: 0.25 lux (25.00P, shutter speed 1/25)
• Size of Photos
1920x1080 pixels, 1280x720 pixels (only when capturing a photo from a clip)
Terminals
• 3G-SDI Terminals 1 and 2
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 2.97 Gbps
SMPTE 424M, SMPTE ST 425-1
Video: Resolution: 4096x2160, 3840x2160, 4096x1080, 3840x1080
Mode: RAW; RGB, 4:4:4, 12-bit; RGB, 4:4:4, 10-bit; YCC, 4:2:2, 10-bit
Frame rate
1
: 59.94P, 29.97P, 23.98P, 50.00P, 25.00P, 24.00P
Embedded audio, time code (VITC/LTC)
1
Available frame rates depend on the resolution and recording mode settings.
• MON. Terminals 1 and 2
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 1.485 Gbps
SMPTE ST 292-1
Video: Resolution: 2048x1080, 1920x1080
Mode: YCC, 4:2:2, 10-bit
Frame rate
2
: 59.94i, 29.97P/PsF, 23.98P/PsF, 50.00i, 25.00P/PsF, 24.00P/PsF
Embedded audio, time code (VITC/LTC), assistance displays
3
(magnification, peaking, zebra pattern,
onscreen markers)
2
Available frame rates depend on the resolution and recording mode settings.
3
Magnification is available for the output from both MON. 1 and MON. 2 terminals. Other assistance displays are available for
the output from the MON. 1 terminal only.
• HD/SD SDI Terminal
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 1.485 Gbps
HD-SDI: SMPTE 292
Video: Resolution: 1920x1080, 1280x720
Frame rate
4
: 59.94i, 29.97 (P/PsF), 23.98 (P/PsF), 50.00i, 25.00 (P/PsF),
24.00 (P/PsF), 59.94P, 50.00P
SD-SDI: SMPTE 259M
Video: Resolution: 640x480, 768x576
Frame rate: 59.94i, 50.00i
Embedded audio, time code (VITC/LTC)
4
Available frame rates depend on the resolution and recording mode settings.
COPY