Canon 10 Camcorder User Manual


 
126
E
Additional
Information
Viewfinder
Clean the viewfinder screen using a cotton
swab. First, pull the viewfinder out until it
stops. Then, press and hold the finder
release button with a sharp object and pull
the viewfinder all the way out. To reattach
the viewfinder, first position the base
horizontally and align it with the
viewfinder’s base. Then press it until it
clicks back into place.
The viewfinder screen scratches easily.
Take care when cleaning.
LCD
Clean the LCD screen using a commercially available cleaning cloth for glasses.
Where there is a big change in temperature, moisture may form on the surface
of the screen. Wipe clean with a soft, dry cloth.
At low temperatures the display may appear to be much darker than usual. This
is not a fault, and as the screen warms up the display will return to normal.
Camera body and lens
Use a soft, dry cloth to clean the camera body or lens. Never use chemically
treated cloth or volatile solvents such as paint thinner.
Video heads
When mosaic-like noise appears on the playback picture,
the video heads may be dirty. When the video heads are
badly contaminated, the camera may show a blank blue
screen or a warning.
For the best picture possible, after using the camera for
approximately 20 hours, clean the video heads using
Canon’s DVM-CL Digital Video Head Cleaning Cassette. If the “noise”
remains, repeat the cleaning (up to maximum of 5 times).
Do not use a wet-type cleaning cassette, as this can cause damage.
Maintenance
If you do not intend to use the camera for some time, store it in an area which is
free of dust and moisture, and where the temperature is no higher than 86°F
(30°C). After storage, check each part and function of your camera to make sure
everything is still working properly.
These cautions also apply to accessories such as battery packs and cassettes.
Storage