Filter
Top Products
99
E
Using a Memory Card
(ELURA20 MC only)
>>>> 50
FINE
640× 480
Image quality ( 95)
Backup battery
( 124)
Remaining battery power
( 122)
Number of images that can
still be recorded on the
memory card ( 96)
The indicators that appear in the display when recording to a memory card:
4. Press the PHOTO button fully down to record the still picture.
•
F
disappears from the display. The shutter sound sounds and simultaneously
the display appears to close for an instant as if it were a shutter releasing.
• The image appears in the display and is recorded to the memory card.
• While the camera is recording the still image, RECORDING TO CARD
flashes and appears red in the display. (It appears white when in
mirror mode and on the screen of a connected TV.)
• To use the self-timer, press the button before step 3, and then press the
PHOTO button fully down. For full details of how to use the self-timer, refer to
p. 67.
• The wireless controller’s PHOTO button has no half-way setting. Press the
button fully and the camera immediately takes the image.
>>>>
2 While the camera is recording the still image, appears red in the display.
• While appears red in the display, do not remove the memory card or
disconnect the power source. Doing so could result in data damage.
>>>>
>>>>