Canon 10 Camcorder User Manual


 
82
E
Editing
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play
back such a cassette, “COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED” appears in the display for a few seconds and then the camera
displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable “COPYRIGHT
PROTECTED DUBBING RESTRICTED” appears in the display; you cannot
record the contents of the tape.
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the camera’s REC PAUSE button.
The camera enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
Recording stops.
6. Stop playback on the other device.
Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
During DV dubbing you cannot add digital effects.
When playing back a tape recorded in SP or LP mode with the
camcorder, you cannot record correctly with other digital devices not equipped
with that mode.
Dubbing