Filter
Top Products
62
E
Using the Full
Range of Features
Sound records/plays back normally.
When operating effects in MOVIE, P.SCAN or CARD REC mode, make sure the
program selector is set to
Q
.
1. Open the menu and select D.EFFECTS.
2. Select D.E.SELECT.
3. Select EFFECT.
• You return to the D.EFFECTS submenu.
4. Select EFFECT again (the name of the previously selected effect
also appears).
• ART, BLK&WHT, SEPIA, MOSAIC settings appear.
5. Select the desired setting.
• The menu returns to the submenu.
6. Close the menu.
• The menu disappears and the name of your selected setting flashes in the
display.
7. If you’re in VCR mode, press the e (play) button.
8. Press the D.EFFECTS ON/OFF button.
• The name of your selection stops flashing and takes effect on the display.
• Each time you press the ON/OFF button, the chosen effect is activated or
deactivated.
Effect on/off
Select effect
Operating effects
8. If you’re in MOVIE or P.SCAN mode:
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
If you’re in VCR mode: Fade in- Press the
e (play) button.
Fade out- Press the
a (pause) button.
D.E.SELECT••EFFECT
EFFECT••••••ART
D.EFFECTS
CARD
REC
MOVIE
P.SCAN
VCR
( 35)