Filter
Top Products
61
Advanced Functions -
Recording
E
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when "H" is displayed on the screen. If not, change the setting following the
procedure below.
Open the menu and select [VCR SETUP]. Select [AV/PHONES H ], set it to
[PHONES H ] and close the menu.
Adjusting the Headphone Volume
Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the
volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
Recording with an External Microphone
You can attach a commercially available
microphone or the optional DM-50 Directional
Stereo Microphone to the accessory shoe.
Refer also to the instruction manual of the
microphone.
1. Attach the microphone to the
accessory shoe.
2. When using a commercially available
microphone, connect it to the MIC
terminal.
❍ When recording in silent places, the built-in microphone may pick up the
motor noise of the camcorder. In such case, we recommend using an external
microphone.
❍ When using a commercially available microphone:
- Use a microphone with built-in power supply (condenser microphone). Almost
all stereo microphones with a plug diameter of 0.14 in. (3.5 mm) can be
connected. The audio level may differ from that of the built-in microphone.
- Long microphones may appear on the screen.
CARD PLAY
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAYCARD CAMERAPLAY (VCR)
CAMERA
VCR SETUP
AV/PHONES ••AV
( 38)
HVOLUME•••••AUDIO SETUP
( 38)