Filter
Top Products
Depth-of-field AE
62
3
Aim the selected focusing point at
the nearest subject you want in
focus, then press the shutter
button. ( )
The in-focus indicator lights and
is displayed.
• If two focusing points are active
(→p.43), both focusing points will be
used for depth-of-field AE.
6
4
Use the same focusing point to
aim at the farthest subject you
want in focus and press the
shutter button. ( )
The in-focus indicator lights and
is displayed.
• You can also reverse the above two
steps.
6
5
Compose the picture and press
the shutter button halfway to
check that the shutter speed and
aperture are not blinking. ( )
The point of focus is set between the
two dEP points. The aperture
required to achieve the desired depth
of field and a suitable shutter speed
are set automatically.
• If you release the shutter button,
and the aperture will be
displayed.
• The exposure setting is set when the
picture is taken.
6
6
Take the picture.
SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 62