Filter
Top Products
77
E
Editing
Dubbing with Digital Video Equipment
Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality.
MV500
Side with arrow
: Signal flow
1. Connect the camcorder and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the side of the
plug marked with the arrow facing as shown above.
2. Prepare the other device.
• Load a blank cassette, and put the other device in record pause mode.
• See its instruction manual for details.
3. Turn the camcorder’s POWER switch to PLAY (VCR).
4. Load a recorded cassette.
Preparations
1. Find a point on your recorded cassette slightly before the
section you want to dub.
2. Press the camcorder’s play button.
• Playback starts.
3. Start recording on the other device as the section you want to
copy appears on the screen.
4. When you get to the point where you want to stop dubbing,
press the stop button or the pause button.
• Playback stops.
Note:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
Dubbing
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 77