Canon MV500 Camcorder User Manual


 
78
E
Editing
REW
PLAY
FF
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
AV
INSERT
PAUSE
SLOW
+ /
/
×2
REC
SEARCH
REC
SEARCH
FOCUS
AE SHIFT
MV500i
The MV500i is equipped with the DV Recording function.
Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV
cable can handle data in both directions.
If a digital VCR is connected and an anomalous signal is sent from the
VCR, the images recorded on the tape may also be anomalous (although it
may not appear so on the TV image), or not recorded at all.
You are unable to dub tapes recorded with the copyright protective signal.
Side with arrow
Side with arrow
: Signal flow
1. Connect the camcorder and the other digital device.
Connect the Canon CV-150F DV cable (optional) with the sides of the
plugs marked with the arrows facing as shown above.
2. Prepare the other device.
Turn on the power and load a recorded cassette.
3. Turn the camcorder’s POWER switch to PLAY (VCR).
DV IN appears in the display.
4. Load a blank cassette.
Example dubbing to the camcorder
Preparations
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 78