Canon MV500 Camcorder User Manual


 
83
E
Editing
Connecting the camcorder to your VCR or 8 mm video camcorder allows
conversion of recorded analog video and audio signals to digital signals in an
instant. The digital signals can be output to the other equipment with a DV
terminal. The camcorder’s DV terminal works exclusively as an output terminal.
There may be cases where analog-digital converter cannot be done properly,
depending on the signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or anomalous
signals such as ones that include ghost signals, etc.
You cannot use your headphones during digital conversion. Even if the
AV/headphone terminal is set to “PHONES” through the menu, it will
automatically be set to “AV”, and “PHONES” will disappear from the display.
You are recommended to use power from a household mains outlet with the
power adapter.
Do not operate with a cassette inserted to the camcorder.
Turn off the power of all equipment before performing connections.
Refer also to the instruction manuals of the other equipment connected.
Digitally Outputting Analog Video and Audio
Signals
Analog-Digital Converter (MV500i only)
AV
MIC
DV
S
OUTPUT
VIDEO
S(S1)-VIDEO
AUDIO
L
R
CV-150F DV Cable (optional)
STV-250N
Stereo Video Cable
: Signal flow
Side with
arrow
S-150 S-video Cable (optional)
Side with arrow
#4_ MV500/MV500i__E(76-95) 2/6/02 14:18 Page 83