Filter
Top Products
119
Using a Memory Card
E
Selecting the Drive Mode
You can choose between three drive modes (recording modes).
Continuous Shooting
You can capture a quick series of still images with the continuous shooting function.
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [CONT. ] and close the menu.
“ ” appears on the screen.
3. Press and hold the PHOTO button to record the still images.
A series of still images will be recorded.
4. Release the PHOTO button to end recording.
❍ Maximum number of continuous shots at one time:
* These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
❍ This function can be assigned to the CSTM KEY ( 53).
❍ The range of the flash decreases in continuous shooting mode. We
recommend recording close to the subject when using the flash.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)CAMERA
DRIVE MODE•••SINGLE
CAMERA SET UP
( 43)
1632 × 1224 Flash OFF/ON 2 frames 10 images
1280 × 960 Flash OFF 3 frames 10 images
Flash ON 2 frames 10 images
640 × 480 Flash OFF 3 frames 30 images
Flash ON 2 frames 30 images
Still Image Size
Built-in flash
Frames per
Second
Maximum Number
of Continuous Shots
Continuous Captures a quick series of still images while you press
the PHOTO button.
AEB (Auto Exposure Bracketing) Captures a still image in three different exposures
just by pressing the PHOTO button once.
Single Records a single still image when you press the
PHOTO button.