Filter
Top Products
96
Playback – Advanced Functions
z You cannot attach sound memos to movies.
z When the memory card capacity is full, a
“Memory card full” message appears and
recording will not be possible to that card.
z You cannot record or play back sound
memos for images that already have an
incompatible sound memo attached. If you
attempt to record or play such images the
“Incompatible WAVE format” message will
display. Incompatible sound data can be
deleted with this camera.
z Sound memos for protected images cannot
be erased (p. 97).
z You can also adjust the volume of the
sound memo in the Set up menu (p. 71).
z If you set [Mute] to [On] in the Set up menu
(p. 70), no sound is reproduced. However,
you can resume the sound and adjust the
volume during sound playback by using the
or button.
Auto Play
Use this feature to automatically play back all
of the images in the memory card (Auto
Play). The LCD monitor displays each image
for approximately 3 seconds.
1
In the [ (Play)] menu, select
(Auto Play) and press the SET
button.
z See Selecting Menus and Settings (p. 66).
z Once you have selected it, Auto Play starts.
z As with the single image playback mode, using
the or button during auto play will
advance through the images more rapidly.
Pausing and Resuming Auto Play
zYou can pause Auto Play at any time by pressing
the SET button. You can then resume it by
pressing the SET button again.
Stopping Auto Play
zTo stop Auto Play, press the MENU button.