Filter
Top Products
84
Resetting the File Number
The images you shoot are automatically assigned file numbers. You
can select how the file number is assigned.
* When a blank memory card is used. If a memory card with recorded data is
used, the 7-digit number for the last recorded folder and image is compared
with the last one on the card, and the larger of the two is utilized as the basis
for new images.
1 In the [ (Set up)] menu, select
[File Numbering].
See Selecting Menus and Settings (Basic
Guide: p. 16).
2 Use the or button to select [Continuous] or [Auto
Reset] and press the MENU button.
Settings can be made by turning the multi control dial.
When the camera is held on end to shoot, the Intelligent Orientation
sensor judges the upper end to be "up" and the lower end to be
"down". It then regulates the optimal white balance and exposure for
vertical photography. This function operates regardless of the On/Off
status of the Auto Rotate function.
If you set it to [On] during shooting and to [On] during playback, the
images you shoot appear right side up regardless of the direction of
the camera.
Continuous
A number one higher than the last one recorded is assigned to the next image.
This is convenient for managing all your images together on a computer because
you avoid file name duplication when changing folders or memory cards.*
Auto Reset
The image and folder number are reset to the starting value (100-0001).* This is
convenient for managing images on a folder-by-folder basis.