Filter
Top Products
120
Playback
Memory Card Operation
Problem Cause Solution
Pressing the playback button
does not start playback.
Camcorder is turned off, or is
not set to mode.
Set the camcorder to
mode.
30
The TAPE/CARD switch is set
to CARD.
Set the TAPE/CARD switch to
TAPE.
30
Cassette is not loaded. Load a cassette.
17
Tape reached the end
(“ END” flashes on the
screen).
Rewind the tape.
30
Image will not appear on the
TV screen.
[AV DV] is set
to [ON].
Set [AV DV] to [OFF].
75
Tape is running, but image will
not appear on the TV screen.
TV/VIDEO selector on the TV
is not set to VIDEO.
Set the selector to VIDEO.
33
Video heads are dirty. Clean the video heads.
113
You attempted to play back or
dub copyright protected tape.
Stop playback/dubbing. –
No sound from the built-in
speaker.
Speaker volume is turned off. Adjust the volume with the
[SPEAKER VOLUME] option.
32
Problem Cause Solution
Memory card cannot be
inserted.
Memory card was not facing
the correct direction.
Turn the memory card over
and reinsert it.
80
Memory card cannot be
recorded.
Memory card is full. Replace the memory card or
erase images.
80,9
4
Memory card is not initialized. Initialize the memory card.
95
Memory card is not inserted. Insert a memory card.
80
File number reached
maximum value.
Set [FILE NOS.] to [RESET]
and insert a new memory
card.
83
SD Memory Card is
protected.
Change the position of the
protect switch.
80
Memory card cannot be
played back.
Camcorder is not set to
mode.
Set the camcorder to
mode.
91
Memory card is not inserted. Insert a memory card.
80
Image cannot be erased. Image is protected. Cancel the protection.
93
SD memory card is protected. Change the position of the
protect switch.
80
“ ” flashes red. Card error occurred. Turn off the camcorder.
Remove and reinsert the
memory card. Initialize the
memory card if flashing
persists.
95