Filter
Top Products
Additional
Information
E
83
Appears when the battery pack
is exhausted (p. 14, 62).
Appears when the tape has
reached the end.
Refer to page 16.
Appears when you press the 2
(record) button if the DV cable
is not connected properly
(p. 58).
Refer to page 68.
Appears as a warning to protect
the tape and also when
condensation is detected.
Remove the tape as soon as
possible after the camera has
displayed the caution.
Refer to page 59.
Refer to page 59.
SET THE DATE AND T IME
CHECK THE LENS
TER I NGEN ”PO ERW TANDBY”S
C
HA
NGE
T
HE
BA
TT
E
R
Y PAC
K
CHECK
THE DV NPUTI
TAPE END
E
TA
P
E I
S
E
R
T
H
A
SET FOR
URS
E
P
R
E ENV T
I
O
N
CONDENSAT I ON
HAS BEEN DET CTEDE
REMOVE THE CAS ETTES
R
ECOPY DPROTECT
CTED
R IGHT
PLAYBACK I S STR IE
R
ECOPY DPROTECT
CTED
R IGHT
DUBB I NG STR IE
Caution phrases
The camera displays various caution phrases —
they appear for 4 seconds before disappearing.
When you start recording, the camera counts from
0SEC to 10SEC. Shots which are shorter than 10
seconds may be difficult to edit later. On the other
hand, if you are not planning to edit the recording,
remember that a shot which does not contain action
should generally last no longer than 10 seconds.
Time Code
0
sec
01
sec
:
10 2 : 3 4 : 2 5
This records counter information, including hour,
minute, second, and frame number on a special
data code area on the tape itself. It is reset
automatically when a new tape is loaded.
Recording reminder
Appears each time you turn the
power on, until you set the date
and time (p. 22).
Refer to pages 8-9.
Refer to page 23.