Canon DXC-D35L/D35PL Digital Camera User Manual


 
Chapter 1 Overview
12 Chapter 1 Overview
Features on the DXC-D35WSL/
D35WSPL
Features only on the DXC-D35WSL/S35WSPL is
described in this section. See “Features on the DXC-
D35/D35P/D35WSL/D35WSPL” (page 9) for
common features on a 4:3 standard-screen type digital
video camera and 16:9 wide-screen type digital video
camera.
Switchable between 16:9 and 4:3 aspect
ratios
A simple menu operation provides instant switching
between the 16:9 and 4:3 aspect ratios. In 4:3 mode, a
screen equivalent to a 4:3 screen is obtained through
digital processing of the 16:9 video signals produced
by the WS CCD. (See page 68.)
Wide-aspect ID signals
A menu setting is available to add wide-aspect ID
signals
1)
to 16:9-mode video signals.
2)
(See page 68.)
Selection of the safety zone size in 16:9
mode
When the aspect ratio is 16:9, you can change the
safety zone size through menu setting (see page 65.)
..........................................................................................................................................................................................................
1) ID signals complying with EIAJ CPR-1204 (DXC-
D35WSL) or complying with ETS WSS (DXC-
D35WSPL).
2) Video signals refer to the following:
• Video signals output from the VIDEO OUT connector
and MONITOR OUT connector.
• The Y component of Y/C separate signals and the Y
component of component signals output from the VTR
connector.
Features