Canon DXC-D35L/D35PL Digital Camera User Manual


 
66 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Item
Settings
×1: Uses only the upper
REC/TALLY indicator.
×2 (normal value): Uses
two REC/TALLY indicators.
VF TALLY
Selects whether or not to use
more than one REC/TALLY
indicators in the viewfinder
(displayed only when the
DXF-701/701CE/701WS/
701WSCE/801/801CE
viewfinder is attached).
VF PLAY
Selects the video signal
displayed in the viewfinder
during playback of the DSR-
1/1P (displayed only when
the DSR-1/1P is connected)
Y (normal value): Y signal
VBS: Composite video
signal
LENS SEL
Selects the types of the lens.
1 (normal value), 2, 3, 4
For details, see “Designating
the lens” on page 90.
Advanced menu page 5
Item
Settings
SS IND
a)
Selects the mode for
showing the shutter setting
when displaying the normal
indications.
3SEC: Displays shutter
setting for three seconds only
when the setting has been
changed.
ALWAYS (normal value):
Displays the shutter setting at
all times.
LL IND
a)
Selects whether or not to
show the LOW LIGHT
indication on the normal
indications when inadequate
lighting is detected.
ON (normal value):
Displays.
OFF: Not display.
MIC IND
a)
Selects whether or not to
show the camera
microphone output
indication on the normal
indications.
ON (normal value):
Displays.
OFF: Not display.
IRIS IND
a)
Selects whether or not to
show the lens’s F-stop value
(iris indication) on the
normal indications. The F-
stop value is always
displayed when in EZ mode.
ON (normal value):
Displays.
OFF: Not display.
a) When the viewfinder’s DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
GAIN IND
a)
Selects whether or not to
always show the gain
setting indication on the
normal indications.
ON (normal value): Always
displays.
OFF: displays for two
seconds only when the
setting has been changed.
FILTER IND
a)
Selects whether or not to
always show the FILTER
knob setting indication on
the normal indications.
The FILTER knob setting
indicator is always displayed
when in EZ mode.
ON (normal value): Always
displays.
OFF: Displays for two
seconds only when the
setting has been changed.
Item
Settings
WHITE IND
a)
Selects whether or not to
show the setting of the white
balance switch.
ON (normal value): Displays.
OFF: Not display.
SKIN IND
a)
Selects whether or not to
show the setting for skin
detail correction.
ON (normal value): Displays.
OFF: Not display.
Advanced menu page 6
a) When the viewfinder’s DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
Item Settings
AUDIO IND
a)
Selects whether or not to
show the audio level
indication on the normal
indications (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
ON (normal value):
Displays.
OFF: Not display.
TAPE IND
a)
Selects whether or not to
show the VTR’s remaining
tape indication on the normal
indications. (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
ON (normal value):
Displays.
OFF: Not display.
Viewfinder Advanced Menu