Canon DXC-D35K/D35PK Digital Camera User Manual


 
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections 27
Using the Camcorder Grip
When using the camera head with a VTR as a
camcorder, you can replace the camera head’s grip
with a camcorder grip (not supplied). The type of
camcorder grip and the method for attaching it differ
slightly depending on the type of VTR.
Attaching a camcorder grip to the DSR-1/1P
1 If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
For details, see “Adjusting the
viewfinder position” on page 32.
2 Remove the camera head
grip’s three screws, then pull
up the grip to remove it.
3 Remove the VTR connection
plate.
4 Remove the DSR-1/1P’s
shoulder strap fitting and the
camera head connection plate.
VTR connection
plate
Camera head
connection plate
Shoulder strap
fitting
(continued)