Filter
Top Products
133
S Direct Printing with Bubble Jet Direct
7
Start printing.
¡ Press the <V> key to select [Print],
then press <0>.
s The printing will start.
¡ When the printing ends, the screen
will return to step 1.
¡ To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
If [Borders] is set, the date might be imprinted on the border, depending on
the printer.
¡ If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
¡ If you select [Stop] during the printing, the printing will stop and the
paper will be discharged.
¡ If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
¡ If you are using a BJ printer equipped with an operation display panel,
the error No. will be displayed if an error occurs. To resolve the respective
error, refer to the BJ printer’s instruction manual.