Filter
Top Products
194 Additional Information
List of Messages
*/)/( Refer to List of Messages for Connecting to an
External Hard Drive (A 200) for external hard drive related messages.
Refer to List of Messages for Wi-Fi Functions (A 200) for Wi-Fi related
messages.
(in alphabetical order)
Back up recordings regularly
- This message may appear when you turn on the camcorder. In the event of a malfunction,
recordings may be lost so back up your recordings regularly.
*/)/( Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
*/)/( Built-in memory is full
- The built-in memory is full (“& End” appears on the screen). Delete some recordings
(A 60, 118) to free some space. Alternatively, save your recordings (A 129) and initialize
the built-in memory (A 41).
*/)/( Built-in memory writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the built-in memory. Select [Recover]
to try to recover the recordings.
*/)/( Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
*/)/( Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(A 36).
- There was an error creating the file name. Set > [File Numbering] to [Reset] and
initialize the memory card (A41) or delete all the photos (A 118) and converted SD mov-
ies (A60).
COPY